Leica SmartNet Network Connection Quick Guide for Carlson SurveCE

Leica SmartNet Network Access with Carlson SurvCE

1. Visit SmartNet website – www.smartnetna.com
2. Click “subscribe” in upper right corner
3. Enter contact information & rover information
4. MTS will process subscription
5. SmartNet will activate subscription(s)
6. Accept the SmartNet Terms & Conditions
7. Receive an Activation Email

To set up on Carlson SurvCE new server connection:

From Main Menu, click on the Equip Tab on banner:

Select GPS Rover option 3

Next Select the RTK Tab on menu bar:

Click on the Tool Wrench Icon near Network

Next Click on down arrow on Name Field

Select New

Back Space <new> and Enter Name (Leica SmartNet), IP Address (ma.smartnetna.com), port (10000) and your user ID and password for Network (case sensitive).  Other IP Address: ny.smartnetna.com ct.smartnetna.com me.smartnetna.com

Click on Accept by Clicking on Green Check Mark

Accept again by clicking on green check mark

Select Leica SmartNet Source Table down arrow from GPS Rover Scrren

Next you must choose Mountpoint product (see list from Leica SmartNet site): Select RTCM3_NEAR
( Nearest Site RTCM 3.0 which will include GLONASS satellites)

Next Select Solution type: Nearest

Then Click on green check mark (OK) to accept

Then Click on green check mark (OK) to accept

You should be back at Main Equip menu and ready to Survey Leica SmartNet.

You should be ready to connect to Leica SmartNet network!